=========================================================================================== HWK Release 26/10/2010 Release Date: 26/10/2010 UFS_SAMs v2.0.10.7 -------------------- SWIFT-AEROFONE E2152 FULL, _RD, E2P Write Bug Fixed. Note: E2152 DX Firmwares cannot be Properly Flashed. QUALCOMM B2710,S3370E added. QUALCOMM+LSI S8000L added (FL) BROADCOM S5620B,S5628i added (FL) COMMON Used Abbrevations List can be seen at the Bottom of this page. =========================================================================================== HWK Release 15/10/2010 Release Date: 15/10/2010 LG_GSM v 2.1.0.6 (HWK Required) -------------------------------- 1. Added NSCK,SPCK,CCK,SIM codes Display for GS10x UFS_SAMs v2.0.10.6 -------------------- TRIDENT X427 added (DUNL,IM,FL) TRIDENT VISION M2520 added (UNL,CUNL,IM,FL) Display of USER LOCK Key for All Models. SWIFT E2550,E2550D,E2558 added (UNL,SECT,IM) Notes: 1.Chinese Versions E2550Zxxx select as E2558 for UNL,SECT,IM. 2.E255x PRAM Flashing not Supported yet, use Original Flasher. B3410C,E2510C,S5050C added (UNL,IM,FL) Note: Chinese Versions B3410Zxxx select as B3410C. SWIFT-AEROFONE C3300D,C3300K,C3303,C3303K added (UNL,SECT,IM,FL) use 530Kom Cable. E1107-DX,E1107L,E1117-MEA-IND,E1130,E1130B,E1150-MEA-SEA,E1153, E1160-DX,E1220,E2120i,E2120L,E2121,E1252,E2121B,E2210T,E 2152, E2370 added (CUNL,PUNL,PIM,FL) Note: Mixing of DX MEA SEA Models causes Blinking or Dead Sets. [Restart] Button now Exit TAT mode with Battery. Auto Exit from TAT Mode when Flashing, not need Cable or Battery Reconnect after UI functions (Info,IM,..) SWIFT-3G J808,S5550,S5550U added (CUNL,SECT,FL) B7722,B7732 DUOS added (CUNL,SECT,FL) Flashing only Master Part. C3630C,C3730C,S3930C TD-SCDMA added (FL) use 530Kom Cable. QUALCOMM A657,A887,A897,M7600L,S5530,T559 added. BROADCOM A697,B3410W added (FL,CUNL,UNFR,BRP) S5250,S5253,S530,S5333 added (FL) Boot Repair Enabled for All Broadcom models, use 530Kom Cable. Some Models have encrypted Boot2.img and don't have uart_boot, for these models use our released Boot_Repair packs. Note: S562x with OneNand Flash Chip, Cannot be Repaired. Added Unlock support(CUNL) for Hidden Sysinfo models (S5560,..) if have no succes in SysInfo search, need ReFlash, to have untrashed FS COMMON Reduced/Full Log of TFS file list progress for OM/Swift. Improved FileOpen dialog, to Override suggested path to last used on same model. Used Abbrevations List can be seen at the Bottom of this page. DOCUMENTS Samsung B7722 How to Rev.1 Samsung C3300_C3303 How to Rev.1 Samsung S523x Warning Rev.1 Samsung S7070 How to Rev.1 Samsung Swift-Aerofone MSL3 Models How to Rev.1 =========================================================================================== HWK Release 09/08/2010 Release Date: 09/08/2010 UFS_SAMs v2.0.10.5 -------------------- TRIDENT VISION M2513 added (UNL,CUNL,IM,FL) SWIFT Added MCU_Id and Type Display. Increased Preloader boot speed. QUALCOMM More Versions Support of Hidden Sysinfo models CUNL (S3370,..) A877,M7600H,M8800H,S5603T,S7120H,S8300T added. QUALCOMM+LSI M8910,M8910B,M8910H,M8910U,S8000,S8000B,S8000C,S80 00H,S8000U, S8003,S8500,S8500C added (FL) BROADCOM C3510T,M3710,S5560H added (FL) S3650H,S5230C added (FL,CUNL,UNFR,BRP) INFINEON Infineon Platform Introduced, See on [Sky/INF] Tab. E1151 added (CUNL,FL) DHLT Engine will ask about additional DHLT tables generation. COMMON [Refresh] will Auto Select Ports, be sure that Right Model and Mode is Selected (Untick [QualComm mode] when Flashing !) Users who not want to wait few hours for 3rd DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT =========================================================================================== HWK Release 06/07/2010 Release Date: 06/07/2010 LG GSM V 2.0.10.4 ------------------ 1. Infineon GB107,GB108,GB115,GS100,GS101,GS102,GS105, GS106,GS107,GS108,KG289,KP109 added. UFS_SAMs v2.0.10.4 -------------------- TRIDENT VISION B3210M added. Bug in E2P Filename Display fixed. OM(SYSOL) On the Fly E2P Patch added to keep Original IMEI number. SWIFT C3212i added(UNL,IM,FL) On the Fly E2P Patch added to keep Original IMEI number. SWIFT-AEROFONE E1080i,E1086,E1086L,E1170,T139 added (CUNL,PUNL,PIM,FL) On the Fly E2P Patch added to keep Original IMEI number. On the Fly MCU Patch added to bypass MSL security for MSL3 (MSLC16) products (E1080,E1080i,E1086,E1150,E1160, ...) after is possible Direct Unlock, Rebuild IMEI in normal way. QUALCOMM S3370,S5350M added (FL,CUNL,UNFR) S5350 added (CUNL,UNFR) Increased Speed in Communications (NVM Read/Write, RAM Read) BROADCOM B5310U added (FL) i6230,S3653M added (CUNL,FL,BRP) Combo Cable (USB+RJ45) Support added, not need Manipulations with Cable when use [QCDI Info] Corrected CSC,APP,PFS flashing for BCM2153 platform (B5310,..) [Boot Change] Product will Restart after success Boot Change, if Failed, will stay in Download Mode to Allow Retry. [Full Download] will Write All without Restart after Boot Change. COMMON [Refresh] will Show Avalaible Ports List with Full Names. =========================================================================================== HWK Release 12/05/2010 Release Date: 12/05/2010 UFS_SAMs v2.0.10.3 -------------------- V 2.1.0.3 ------ TRIDENT M628N added (DUNL,IM,FL) SWIFT A256,J218,S3600i,S3601C added (UNL,IM,FL) SWIFT-3G B2703 added (CUNL,FL,SECT,BT) QUALCOMM A747,C5510,C5510U,T929 UNLOCK and UNFREEZE added. Improved Decryption algo, more models UNLOCK and UNFREEZE supported by Default. BROADCOM S5230K,S5230R added (CUNL,FL,BRP) B5310,S5620,S5628,S7070C added (FL) Use Samsung Kies drivers for these models (B5310,S562x) Fixed 'Cannot Find NandInfo !' on some models. COMMON Log to file fixed for Trident models. Introduced New Extremely Fast Key Calculation Algorithm (DHLT) Need few hours for Tables generation at First Software startup. But after, Key calculation for Qualcomm, Broadcom and Trident platforms will take few seconds. DHLT (c)SarasSoft. Users who not want to wait few hours for DHLT table generation can download the files from our Official Rapidshare mirror. The files should be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT =========================================================================================== HWK Release 27/03/2010 Release Date: 27/03/2010 UFS_SAMs v2.0.10.2 -------------------- SWIFT-AEROFONE T239 added (CUNL,FL) BROADCOM Fixed UnFreeze Key Display. =========================================================================================== HWK Release 24/03/2010 Release Date: 24/03/2010 UFS_DCTxBB5 v2.0.10.1 ----------------------- 1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed. 2. Box Init bug after BB5 flash fixed. =========================================================================================== HWK Release 23/03/2010 Release Date: 23/03/2010 UFS_DCTxBB5 v2.0.10.0 ----------------------- 1. New BB5 products: RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635 (6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690) 2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b) 3. More DCT4+ added for unlock (ASIC 3168) see corresponding list. 4. McuSw tag fixed in vpl parser. 5. Fixed time-out bug for some RAPU models. 6. [Det.Log] CheckBox now active, can auto create LOG file. 7. [Info] Shows Camera DCC settings and Status (for both Cameras) 8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model. 9. Increased PM read default margins, to have DCC in read PM for DCT4+ 10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7) 11.Fixed [Format] bug for new BB5 Symbian products. 12.ENO File flashing support (E63,E66,..,N97,..) 13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20 14.[Check] Shows PASUBTOC SL related contents. Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. LG GSM V 2.0.10.0 ------------------ 1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added. 2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added. 3. Infineon New Flash Chip SV7E3204UTA support. 4. ADI KG129,KG248,KG298 added. 5. " Cannot open file " Bug Fixed. SAMs V 2.0.10.0 ---------------- TRIDENT C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758, X138,X180,X468P,X478,X568 added (DUNL,IM,FL) USB flashing introduced for HPE models (U600,.. Approx. 2x faster) TRIDENT VISION B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N, S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL) MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...) USB UI functions introduced, allows to unlock USB only phones. USB flashing introduced (Approx. 5x faster) (Cannot use USB flashing of dead phones which have UL erased or damaged. RJ45 flashing can be used to recover from erased UL situation) SWIFT A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212, C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118, F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C, S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL) Added ENG flashing for DUOS FOTA models (D988,B5712C,..) Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100) B5702,D988,F265L,S5050 (SECT) bug fixed. CSC Area format added. SWIFT-AEROFONE A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210, E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL) E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150, E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL) SWIFT-3G C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT) P270 (CUNL,SECT) bug fixed. E2P Write is supported only for C5130,C5130S and C5130U. QUALCOMM A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837, A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350, S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F, S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added. Fixed flashing of non page size aligned files (rc1,rc2,ffs) Added flashing support for QSC62xx models. UNLOCK and UNFREEZE added for these models: A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C, S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40 BROADCOM QC Legacy BroadCom models introduced: i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G, S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C, S7070 (CUNL,FL) To read codes use: [Mobile Info] button using USB Cable (Phone Switched-ON) and after [QCDI Info] button, using RJ45 Cable (Phone-OFF) QC Legacy BroadCom models Full Flashing (with BOOT Change) [BOOT Repair] for QC Legacy BroadCom models added. Boot Repair and Codes Read is possible only for phones with NM_20 pin USB/RJ45 connector ! COMMON Log to file added. CLONE error message fixed. =========================================================================================== HWK Release 18/08/2009 Release Date: 18/08/2009 The Official release is ready in our download area http://sarunasoftware.com. WARNING !!! If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk. Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite. You MUST update your HWK using client 2.0.9.0, old client versions will no longer work. You MUST be running HWK software 2.0.9.0 to access support. UFS_DCTxBB5 v2.0.9.0 ---------------------- 1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483, RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602 (6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2, 6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d) 2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b) 3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF) 4. Corrected VPL parsing for some models (N97) 5. Only NU48F256 left in [1331] option and moved to BB5 Tab. 6. SX4 bypass introduced using temporary NPC certificate erase. 7. [One Boot] option introduced (RAPx based One MCU products) 8. Enabled Files Multiselect, when Writing Certificates. 9. Erase Option for BB5 (for Experts Use Only !) Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. LG GSM V 2.0.9.0 ----------------- 1. Unlock Codes Display for Infineon EGOLD Voice added (Boot and See NCK Code for Instructions Press UNLOCK) SAMs V 2.0.9.0 --------------- TRIDENT T539 added (DUNL,IM,FL) TRIDENT VISION Fixed MSL algorithm for some models (C3050,...) SWIFT D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT) SWIFT-AEROFONE B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B, E2210B added (DUNL,IM,FL) QUALCOMM Manual Port Selection Added (Use Refresh, After Each Phone Reboot or Reconnect) (Untic QualComm Mode, Before Flashing) F480R,i6210,U900W added. UNLOCK and UNFREEZE added for these models: A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540 =========================================================================================== HWK Release 08/06/2009 Release Date: 08/06/2009 The Official release is ready in our download area http://sarunasoftware.com. WARNING !!! If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk. UFS_DCTxBB5 v2.0.8.5 ---------------------- 1. New BB5 products: RM-412,RM-413,RM-443,RM-505,RM-506,RM-507,RM-570 (E75-1,E75-2,6303c,N97-1,N97-5,N97-3,6600i-1) 2. Introducing RAPU-YAMA ASIC: RM-368,RM-431,RM-432,RM-470 (6260s-1,5630d-1,5630d-1b,6700c-1) support added. 3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543 (2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2) 4. New DCT4+ UNL versions support: RH-99 v5.91, RH-100 v5.80, RH-105 v5.91, RH-106 v5.80, RM-305 v5.91 (1200, 1200b, 1208, 1208b, 1650) 5. Certificates write error in DL mode fixed. 6. Check is ASIC supported by firmware for DCT4 and WD2 products. 7. Read UEM IMEI or ESN for DCT-4/WD2 ASIC 2,5,6,11 when Rd UEM. 8. Added backup of PM 120 block when make Bk.308 (if exists) 9. Added [Skip Erase] option for BB5 products (for Experts Use Only) 10.Added [1331] option, to switch on/off NU48Fxxx Intel Chips Solution. Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. LG GSM V 2.0.8.5 ----------------- 1. MTK KG195,KP199,KP220 support added. 2. PCS files support added for MTK models. 3. Cable type indicator. SAMs V 2.0.8.5 --------------- TRIDENT B100K,C140i added (DUNL,IM,FL) TRIDENT VISION C3010,C3050,C3060R,C3110,C3110C,S3500 added (CUNL,IM,FL) M120,M128,E1040,S3030 added (DUNL,IM,FL) B520 Vodafone support added. (use B520B-V model, not mix with B520, filenames are similar) (Use [Reset MMI] if phone ask for password without SIM) New MSL bypass algo introduced (B220,..,C3050,E1410,S3500...) allows direct codes reading, unlock and IMEI repair. MSL Repair introduced, allows to repair or use alien E2P (Repair of "User Fault on Illegal Trial !!" and restore IMEI) OM(SYSOL) C160G added (DUNL,IM,FL,SECT) SWIFT B2100,C5212,E250i,F265L,F270,J700i,M158,P250,U800E ,X576 added (DUNL,IM,FL,SECT) SWIFT-AEROFONE B100i,B210 added (DUNL,IM,FL,SECT) C270,E1100,E1120,E1125W,E1125-SEA,E1210M,E1210S,E1310B, E1310M,E1310S,E1360B,E1360M,E2100,E2210 added (DUNL,IM,FL) (Do not mix B-C-M-L-S-T-EUR-SEA models! More info on support) B130S,B130T flashing fixed (blinking or frozen phone) (Must select target firmware as model, e.g. model is B130 and want to flash B130S, select B130S as the model.) SWIFT-3G P270 added (DUNL,FL,SECT,BT) QUALCOMM A777,M7600,M7603,M8800C,M8800L,S5600,S5603,S8300N added. [Write E2P] (NVM) added. UNLOCK and UNFREEZE added for these models: A411,A777,S7220, S7330,S8300,S8300C,Z230 (Use [QCDI Info] button to read keys) Old models UNLOCK and UNFREEZE: Z300,Z500,..,ZM60,.. (these are not in models list, select any model. Use [Mobile Info] button to read keys & [Unlock] to direct unlock) =========================================================================================== HWK Release 06/04/2009 Release Date: 06/04/2009 UFS_DCTxBB5 v2.0.8.4 ---------------------- 1. Added info about flashed Certificates for BB5. 2. Corrected DCT4+ unlock error messages. 3. Find Product settings by VPL files. 4. New BB5 product RM-458 (6208c) Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. SAMs V 2.0.8.4 --------------- TRIDENT B100M added (DUNL,IM,FL) TRIDENT VISION B310R added (CUNL,FL) SWIFT-AEROFONE E1070,E1100T,E1125 added (DUNL,IM,FL) QUALCOMM Increased Comms speed on RJ45 interface. UNLOCK and UNFREEZE added for these models: L810,L811 (Use [QCDI Info] button to readout keys) =========================================================================================== HWK Release 21/03/2009 Release Date: 21/03/2009 ATRz v2.0.8.3 ------------- 1. Fixed clipboard issue on Vista. UFS_DCTxBB5 v2.0.8.3 ---------------------- 1. New BB5 products: RM-495,RM-496 (5130c-2,5130c-2b) 2. New DCT4+ products: RH-121,RH-122 (1661-2b,1661-2) 3. New DCT4+ UNL versions support: 1202-2,1202-2b (RH-111,RH-112 v3.00, v3.10) 1661-2 (RH-122 v3.10) 2610,2610b (RH-86,RH-87 v7.11) 2680s-2,2680s-2b (RM-392,RM-393 v4.56, v4.91) 5000d-2,5000d-2b (RH-362,RH-363 v3.50, v3.54) 7070d-2 (RH-116 v6.20) 4. Simlock status detail info for DCT4 and BB5 models added. 5. Fixed clipboard issue on Vista. Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. LG_GSM V 2.0.8.3 ----------------- 1. BIN (TotalBin) files support added for ADI models. (BIN bundle files open as Code) 2. ADI KP260, KP265 UNLOCK and REBUILD fixed. 3. ADI KP170, KP175 added, cable as for KP130,KP210,KP260 4. LGMDP NV2 format files support for QC NVM Write. 5. User interface localisation. 6. Fixed clipboard issue on Vista. SAMs V 2.0.8.3 --------------- TRIDENT C275L,C500L,C506,C510L,C516,E570L,U106 added (DUNL,IM,FL) TRIDENT VISION B520B,M310L added (CUNL,FL) OM(SYSOL) C145,C161,C168B,M140L added (DUNL,IM,FL,SECT) SWIFT C3610C,E200B,E230L,E251L,F270L,F275L,F480L,J700L,P 906,U900L added (DUNL,IM,FL,SECT) SWIFT-AEROFONE B130L,E1110(Euro and Asia),E1110C,E1117,E1117L added (DUNL,IM,FL,SECT) Increased flashing speed. QUALCOMM G400L,M8800B,V820L added. UNLOCK and UNFREEZE added for these models: G400,G400F,G400L,Z150 (Use [QCDI Info] button to readout keys) COMMON Fixed clipboard issue on Vista. =========================================================================================== HWK Release 10.02.2009 Nowa aktualizacja dla HWK gotowa do pobrania z supportu w programie dodano / zmieniono: UFS_DCTxBB5 v2.0.8.2 ---------------------- 1. Flash Update Pack problems Fixed. 2. New BB5 products: RM-247, RM-297, RM-333, RM-334, RM-335, RM-348, RM-349, RM-350, RM-356, RM-398, RM-399, RM-415, RM-427,R M-428, RM-429, RM-437, RM-449, RM-450, RM-472, RM-493, RM-494 (N96-1, N96-5, N85-1, N85-3, N85-5, N79-1, N79-3, N79-5, 5800d-1, 7510a, 7510a-b, 6600s, 5800, 5800, 3610a, E63-1, E63-2, E63-3, N96-3, E71-5, E66-5) 3. DC4 Flash Chip 0020883C Fixed. 4. New DCT4 products: RH-111, RH-112, RH-113, RM-438, RM-439, RM-490, RM-500 (1202-2, 1202-2b, 7100s-2, 7100s-2b, 1680c-2b, 2680s-2b) 5. New DCT4+ UNL versions support: 1200(RH-99 v5.71,v5.80) 1202(RH-112 v2.80) 1208(RH-105 v5.71,v5.80) 1650(RM-305 v5.71,v5.80) 6. User interface localisation. Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone. LG_GSM V 2.0.8.2 ----------------- 1. Infineon GB100, GB105, GB106, KG285, KG288, KP100, KP105, KP106, KP 107 support added. (BIN bundle files open as FLS) 2. Read/Write for Infineon EGOLD Voice added. 3. Auto Backup for Infineon EGOLD Voice added. 4. ADI KF240, KF300 support added. (BIN bundle files open as Code) Cable as for KP130, KP210, KP260 5. QualComm models introduced. SAMs V 2.0.8.2 --------------- TRIDENT B270 added (DUNL,IM,FL) TRIDENT VISION J610 MSL corrected (DUNL,IM) E215L,M320L added (CUNL,FL) (Use [Reset MMI] if phone ask for password) OM(SYSOL) M140 added (DUNL,IM,FL,SECT) SWIFT J706,L708E added (DUNL,IM,FL,SECT) SWIFT-AEROFONE B130,B130S,B130T fixed flashing for HW 0.600 QUALCOMM ENUMERATION NOT EXIST: 20 bug fixed (up to COM256 supported) Fixed flashing for OEMSBL V5.32 and higher (M7500,M8800) UNLOCK and UNFREEZE added for these models: F480F, M7500(Armani), M8800(Pixon), U700, U700B, U708, U 800, U800F (Use [QCDI Info] button to readout keys) S7220,S7350 added. =========================================================================================== HWK Release 14.01.2009 Nowy update dla HWK gotów do pobrania ze strony supportu. W programach mamy nastepujące zmiany: UFS_DCTxBB5 v2.0.8.0a ----------------------- 1. Poprawka Flasha dodano do instalera SAMs V 2.0.8.1 --------------- TRIDENT CC01,P258,U600G dodano (DUNL,IM,FL) TRIDENT VISION B220, B310, B320, B518, B520, B528, J600G, J610, J618, M318, M620, M628 dodano (CUNL,FL) L320 dodano (DUNL,IM,FL) (Używaj [Reset MMI] jeżeli telefon prosi o hasło) OM(SYSOL) B110 dodano (DUNL,IM,FL,SECT) SWIFT D618, D980, E2510, F250L, F268, F278, G600G, G618, J770, J808E, L258, M150, M200, M3200, M3510, S3600, T429, U708E, U808E dodano (DUNL,IM,FL,SECT) D780, D788, D880, D888, D980 SLAVE support added (DUNL,IM,SECT) J150 fixed (DUNL,IM,SECT) IM Rebuild added and RAW TFS Read fixed for these models: D618, D780, D788, D880, D888, D900i, D908i, D980, E200, E208, E250, E250D, E250V, E256, E258, E258D, E251, E251C, E480, E488, E590, E598, E740, E747, E830, E838, E2510, F110, F250, F250L, F258, F268, F278, G600, G608, G808E, G618, J150, J210, J700, J708, J770, J808E, L258, L310, L600, L608, M150, M200, M610, M618, M3200, M3510, P180, P260, S3600, T429, U708E, U808E, U908E (Need power up phone with battery after IM done !) SWIFT-AEROFONE B130, B130S, B130T added (DUNL,IM,FL,SECT) SWIFT-3G B2700, J800, L700, L708 introduced (DUNL,FL,SECT,BT) SKYWORKS C100 - 'Not Released Yet' bug fixed. QUALCOMM F480G, F480H, M7500, M8800, S7330, U900F, U900G, U900K added(FL,INF,REUL) Added QualComm mode support: (*#QUAUSB# to enter QualComm mode, QC Debug Interface on USB) (*#SAMUSB# to enter Samsung mode, QC Debug Interface on RJ45) QCDI Info, NVM Read, RAM Read added. UNLOCK and UNFREEZE introduced for these models: F480x, L760x, U900x, Z240 (Use [QCDI Info] button to readout keys) COMMON Dodano przycisk Stop. User interface localisation. =========================================================================================== HWK Release 14.09.2008 Nowa aktualizacja dla HWK już gotowa do pobrania z supportu HWK. Zmianą uległy prawie wszystkie programy HWK. Poniżej pełna lista zmian w programach. UFS_DCTxBB5 v2.0.8.0 ---------------------- 1. Dodano nowe BB5: RM-207, RM-235, RM-236, RM-257, RM-270, RM-277, RM-325, RM-328, RM-342, RM-343, RM-345, RM-346, RM-352, RM-354, RM-355, RM-357, RM-358, RM-359, RM-367, RM-378, RM-379, RM-386, RM-387, RM-396, RM-397, RM-400, RM-407, RM-408, RM-409, RM-410, RM-411, RM-414, RM-416, RM-417, RM-418, RM-419, RM-420, RM-422, RM-425, RM-436, RM-462 (6263, N78-1, N78-5, 3555b, 3555, 3555c, 6600f-1, c6220c-1, N78-3, E66-1, E66-2, E71-1, 3600s, 7610s, 7610sb, E71-2, 5610d-2, 5610d-2b, 6210s-1, 7310cb, 7310c, 6210s-5, 6220c-5, 6212c, 6500c-5, 6650d-1c, E71-3, 6210s-1c, 5320d-1, 5220b, 5220, 6600s-1c, 5320, 5320d-1b, 5320, 6210s-1b, E66-3, 6124c-1, 6122c, 7210c, E71-5) 2. Dodano nowe DCT4: RH-116, RH-117, RH-118, RM-391, RM-392, RM-393, RM-394, RM-395 (7070, 7070b, 1681c, 2760h, 2680s ,2680s-2b, 1680c-2, 1680c-2b) 3. Nowe DCT4+ do unlocka: 1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32) 1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32) 1650 (RM-305 v5.32,v5.51,v5.53) 1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63) 2610,2610b (RH-86,RH-87 v6.73,v7.10) 2630 (RM-298 v5.61) 2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61) 2760h (RM-391 v5.45) 4. Poprawiono małe błędy. 5. Nowe Flash Update Pack 8.36.2.35145 LG_GSM V 2.0.8.0 ----------------- v 2.0.8.0 (HWK Required) ------- 1. Dodano "FSct0" (Force Sector 0 Overwrite) Checkbox in Infineon platform. Używać dla Frozen lub blinking (KE800,..) 2.Dodano KP130, KP210, KP215, KP260, KP265. SAMs V 2.0.8.0 --------------- TRIDENT dodano S730i (DUNL,IM,FL). B200,B300 DUNL oraz IM poprawiono. Zmieniono regiony oraz poprawiono. Popraiwono MSL Repair, oraz dodano nowe modele: C17x, C26x, C520, E84x, E90x, E95x, F21x, M300, M60x, P520, U10x, U30x, X82x "Erase NOR" activated. Enhanced 4CC protocol handler (fixed error on PC busy) TRIDENT VISION E21x,J60x fixed (INF,DUNL,IM) M310 added (FL,CUNL) Enhanced 4CC protocol handler (fixed error on PC busy) OM(SYSOL) A117,C288,M130L added (DUNL,IM,FL,SECT) E746 bug fixed. SWIFT D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310, P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT) F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes. E35x,E37x,T809 DUNL, SECT and IM fixed. E480,E488 bug in DUNL,SECT fixed. D880-Duos flashing bug in 2.0.7.2 fixed. X700 SECT fixed. SWIFT-AEROFONE B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes. QUALCOMM A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817, F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800, G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G, L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B, U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170, Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560, Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL) COMMON Product Langpacks description added (Info and MCU-Open) Note, real menu languages can differ from listed here, for different models, firmware versions. Languages in brackets is not mandatory for current Region. SeDBx v2.0.8.0 --------------- DB2010 1. Added Support for: 36Brown, 49Brown DB2012 1. Added Support for: 50Brown, 51Brown, 51Red, 53Red. 2. Added CID Upgrade. DB2020 1. Added Support for: 49Brown. 2. Loaders Updated. PNX5230 1. Added Support for: 49Brown, 52Brown. 2. Loaders Updated. USB Drivers are installed to X:Program FilesSarasSoftUFSUFS_DBXUSBFlashDriver